● Traditional recycling methods: high pollution and low utilization rate. The main components of the control line are PVC sheath and copper core. Recycling is only valuable if you separate the two materials. However, because these control lines are uneven in thickness and disordered, the traditional dialing machine does not work. The old recycling method is to incinerate the outer layer of PVC to obtain the internal copper wire. This method causes environmental pollution on the one hand and PVC plastic on the other hand.
● At present, the recycling method is high in cost performance and low in pollution. The copper-plastic separator is used to pulverize these messy control lines into rice grains, and then sorts them by using different proportions of PVC particles and copper particles to obtain clean PVC particles and copper particles. The separation cleanliness of the two materials can reach more than 99%. They can be reused directly, and the whole process uses physical methods without changing the performance of the material or causing secondary pollution.