1. Before the test start, it is necessary to strictly check whether the installation of various parts of the machine meets the requirements, whether the screw bolts are loose, and you can use the hand to gently pull the belt to test the rotation, whether there is a phenomenon such as shelling. At the same time, check the direction of rotation. It is strictly forbidden to crush flammable and explosive materials to avoid accidents.
2. Uniform cutting should be maintained during production to ensure the crushing quality and normal production of the crusher, and the motor overload is strictly prohibited to ensure the normal operation of the machine.
3. In addition to frequent inspections to check the looseness of the various parts, at the same time pay attention to check the wear of the wearing parts, such as serious wear and tear should be replaced in time to avoid damage to the main components.
4. Always check the wear of the gear plate of the crusher. If the wear is serious, replace the tooth plate in time to avoid running grain.
5. Due to the high speed of the crusher, in addition to the correct and firm installation, good lubrication should be maintained at the same time to keep the machine running normally. Under normal circumstances, the bearing temperature does not exceed 70 degrees is normal. The main bearing is added with butter and molybdenum disulfide once a week, and the high-speed butter is better.