1) Establish mechanisms for collection, processing, and reuse to encourage the reuse of spare parts for scrapped automobiles;
2) Re-use of parts for automobiles;
3) After July 1, 2003, the market for cars, minivans and trucks will be introduced to limit the content of heavy metals such as lead, cadmium, mercury and hexavalent chromium.
Command concentration upper limit:
The highest concentration of lead, mercury and hexavalent chromium contained in the same material shall not exceed 0.1% (1000ppm) of the weight of cadmium contained in the same material. The highest concentration shall not exceed 0.01% (100ppm) of the weight, different materials and The same material and different colors must be tested separately.
Instruction recycling indicator:
From January 1, 2006, at least 85% of the average weight of each scrapped car can be reused each year, of which the material recovery rate is at least 80%.
Starting from January 1, 2015, these two indicators will be raised to 95% and 85% respectively.
Sphere of influence:
Automotive and automotive waste, including its accessories, materials and supplies, substitutes, manufacturers and raw material suppliers.
solution:
Reasonable use of ELV recycling equipment to recycle used vehicles, reduce environmental pollution, AAS+ hydride generator or ICP for harmful substances lead, mercury, cadmium, hexavalent chromium with ultraviolet spectrophotometer.