Waste tire balers may have many problems in the process of packaging the goods, and these problems may occur from time to time, and any manufacturer's equipment will appear. These are common problems of waste tire balers, also known as common faults of waste tire balers. Although these common faults are not big problems, they will affect normal production. Therefore, failure to solve them in a timely and effective manner will cause big problems. The common faults of waste tire balers are mainly manifested in the following aspects:
1. No vacuum. If the waste tire baler used for the first time is not vacuumed, the electric pump is reversed, and the vacuum pump reverses and cannot be vacuumed. If it is suddenly not used after a period of use, then it may be caused by a vacuum pump failure or a circuit board failure. Another possibility is that the vacuum chamber is deformed, and the upper cover of the vacuum machine cannot be completely sucked, resulting in the inability to evacuate.
2. Not sealed. If the waste tire baler is not sealed, first observe whether the bag has hot marks. If there is, it means that the heating temperature is not enough, just adjust the heating temperature. If the bag does not have a hot mark, then the heating bar has no temperature at all, which may be caused by two conditions, one is that the heating bar is broken or burned, and the other is that the heating transformer is burnt. Users only need to step by step to solve them one by one.
3. Waste tire baler seal is not smooth. The bag appears unevenly in the seal, The seal has wrinkles and there is no obvious pattern at the seal. The wrinkles at the seal are mainly caused by the bag being too short. Generally speaking, the length of the vacuum bag should be 3-4cm longer than the package, so as to ensure that there will be no air leakage during the packaging process. There is no obvious pattern at the seal. This is mostly caused by the heating time being too long. The heating time is too long. The heating belt completely burns the vacuum packaging bag and loses the beauty of the sealing. Therefore, the sealing is not flat.
4. Waste tire baler vacuum is getting lower. In theory, the degree of vacuum can only be known by professional instrument measurement, but some of the more obvious low vacuum can still be seen by the naked eye. For example, it takes 10s to draw a bag of items, but with the use of the machine, the vacuuming time needs to be longer to achieve the initial effect, which is the performance of the vacuum is getting lower. This situation occurs in the waste tire baler, mostly because the vacuum pump enters a lot of water, causing the oil in the vacuum pump to be diluted and losing its original function. The vacuum pump enters the water because the packaged item contains a lot of water, or the package is directly liquid. If such a situation occurs, the user should promptly replace the vacuum pump oil to solve it.
www.autorecyclingchina.com